News

  • 2018-10-05
    Shanghai (Gasgoo)- The Roewe MARVEL X intelligent electric SUV officially hit the market on September 30, priced from RMB268,800 to RMB308,800 after the subsidy is given to consumers.
  • 2018-10-05
    The mould consists of two primary components, the injection mould (A plate) and the ejector mould (B plate). These components are also referred to as moulder and mouldmaker. Plastic resin enters the mould through a sprue or gate in the injection mould; the sprue bushing is to seal tightly against the nozzle of the injection barrel of the moulding machine and to allow molten plastic to flow from the barrel into the mould, also known as the cavity.[12]:141 The sprue bushing directs the molten plastic to the cavity images through channels that are machined into the faces of the A and B plates. These channels allow plastic to run along them, so they are referred to as runners.[12]:142 The molten plastic flows through the runner and enters one or more specialised gates and into the cavity[19]:15 geometry to form the desired part.
  • 2018-10-05
    Shanghai (Gasgoo)- Chinese EV startup CHJ Automotive (CHJ) will officially launch its first model, a range-extended electric SUV, on October 18, according to local media.
  • 2018-09-20
    From 6 to 6,000 ton clamp capacities, Milacron offers you the widest range of injection molding machines. Choose from all-electric, servo or hydraulic machines with a full range of plastics processing technologies, including multi-component and co-injection.
  • 2018-09-20
    1. Detailed Features and Complex Geometry The injection molds are subjected to extremely high pressure. As a result the plastic within the molds is pressed harder against the mold compared to any other molding process. Due to this excessively high pressure, it is possible to add a large amount of details into the design of the part. Furthermore, due to high pressure during the molding process, complex and intricate shapes can easily be designed and manufactured which otherwise would have been too complicated and expensive to manufacture.
  • 2018-09-17
    In injection molding material is fed through a hopper into an extruder, where a reciprocating screw mixes and melts the material then injects it into a mold. Injection molding machines, or presses, are rated by tonnage, which expresses the amount of clamping force that the machine can exert to keep the mold closed during the process.
  • 2018-09-17
    The cycle time of the plastic injection molding process can be broken down into the injection time, cooling time, and the resetting or changeover time. By reducing any of these times, production cost is lowered. Frequent mold changes allow inventory to be reduced and provide faster response to market requirements. The Quick Mold Change Systems from EAS lower manufacturing cost by reducing changeover time.
  • 2018-09-17
    An injection machine is made up of three primary components – the feed hopper, the screw and the heated barrel. Plastic granules for the part are fed into the heated barrel by a hopper. Plastic that is placed in the hopper is usually in powder or granular form although some resins, for instance silicone rubber, may be a liquid and might not entail heating. The material is then melted utilizing the frictional action of a reciprocating screw accompanied with heater bands. The molten plastic is then injected through the nozzle and into a mold cavity – it may seem easy, but injection molding is actually a very complex process. While in the mold cavity, the material cools and solidifies to the configuration of the cavity. When the part has hardened, the moveable platen that the mold is mounted opens and the part is ejected using ejector pins.
  • 2018-09-17
    What is injection molding? Injection molding is a manufacturing process commonly used for fabricating items from plastic trinkets and toys to automotive body parts, cell phone cases, water bottles, and containers
  • 2018-09-15
    Plastics are synthetically produced non-metallic compounds. It can be molded into various forms and hardened for commercial use. Plastic molding products can be seen everywhere. Examples are jars, protective caps, plastic tubes, grips, toys, bottles, cases, accessories, kitchen utensils and a lot more.
  • 2018-09-15
    Advantages And Disadvantages Of Injection Moulding
  • 2018-09-15
    Material for the part is fed into a heated barrel, mixed, and forced into a mould cavity, where it cures and hardens to the configuration of the cavity. Moulds are typically made from metal, usually either steel or aluminium, and precision-machined to form the features of the part. They may need to split in a variety of ways to eject the finished part, or locate inserts that are bonded into the product.
Home 1 2 3 4 5 6 7 8 9 10 11 Next Last Total 58 Page 694 Records