Resources
Vertical Pulse Vacuum Automatic Sterilizer
These series sterilizers are a kind of automatic instant sterilization equipment which adopts steam as sterilization medium. The
Technology advantage:
1. Microcomputer control system is adopted, the system is powerful and reliable;
2. Fully automatic heating and sterilization.
3. Touch key, programs selectable LED pilot light, easy operation;
4. LED real-time displays status, temperature, pressure and time.
5. Preset 3 non-liquid sterilization program and one liquid sterilization program, two of them can be defined by the user.
6. High penetration ensure the high steam penetrate into the load quickly, so as to ensure sterilization thoroughly.
7. Perfect fault check system and display the fault information;
8. The beep will sound once the sterilization cycle complete.
Safety feature
Heater protect:
Anti-dry heating: the system will cut off its power supply once the water level is lower than the heating pipe, and show the alarm information.
Safety interlocking door: electronic lock to ensure the sterilizer can begin to work only if the door is closed properly. The door cant be opened when the chamber is pressurized, or the power supply is not connected.
Over-temperature and over-pressure protect: When the inner temperature or pressure exceed the limit, the system will start up procedures to lower temperature and release pressure.
Automatic release safety valve: When the chamber inside pressure exceeds preset value, the safety valve will release pressure automatically.
Electricity protect: Designed protect function in case of short circuit and leakage current.
Main parameter:
Design pressure: 0.26MP a
Design temperature: 150
Max. working pressure:
Max. working temperature: 136
Sterilization temperature: 121-134
Sterilization period: 099min
Temperature accuracy:+2/0
Temperature homogeneity in the chamber: ≤±0.5
Water supply: distilled water or purified water
Material of chamber and door: SUS304 stainless steel
Type |
Chamber Volume |
Chamber Dimensions |
External Dimensions |
WG-C23N.L |
23 |
250x460 |
450×400×605 |
WG-C35N.L |
35 |
321x450 |
448×520×800 |
N.L |
45 |
316x580 |
500×800 |
|
50 |
635 |
576×500×900 |
WG-C60N.L |
60 |
380×510 |
695×500×850 |
WG-C80N.L |
80 |
380×710 |
695×500×1040 |
WG-C100N.L |
100 |
380×910 |
695×500×1180 |
23L-100L
1. Automatic heating and sterilization. Two-channel switch control the pressure, the accuracy can reach ±0.005MPa
2. 0.26MPa design pressure can assure the temperature reach 134 at place of 3000 meters above sea level and 70kpa of atmospheric pressure.
3. Sterilization temperature is between 121 and 134, which can meet sterilization demands of many kinds of load.
4. The max. working pressure is lower than safety valve release pressure during sterilization cycle, thus the valve will not release steam and the surrounding is dry.
5. The temperature can be set by the user according to the load type.
6. Real time display pressure and temperature.
7. LED displays status, the beep will sound once the sterilization cycle complete.
8. Door cover can get beautiful appearance, thermal insulation and heat preservation.
9. with 4 casters for easy move of the sterilizer.
Over-temperature protect: When the inner temperature exceed the limit, the system will cut off the power supply.
Safety interlocking door: the power supply cant be connected to the sterilizer if the door is not closed properly. The door cant be opened when the chamber is pressurized.
Automatic release safety valve: When the chamber inside pressure exceeds preset value, the safety valve will release pressure automatically.
Electricity protect: Designed protect function in case of short circuit and leakage current.
Max. working pressure: 0.22Mpa
Max. working temperature: 136
Sterilization temperature: 121-134
Sterilization period: 060min
Temperature accuracy: 02
Temperature homogeneity in the chamber: ≤±0.5
Water supply: distilled water or purified water
Material of chamber and door: SUS304 stainless steel
- What affects injection mold machining accuracy and productivity?
- Shenzhen top five mold manufacturers: how plastic products are processed and produced?
- Shenzhen Ideal Vowin mold manufacturer: how to effectively improve the precision of mold processing?
- Chrome plating, a process that makes cars stylish
- Six injection molding processing technologies for home appliance plastic products
- Advantages and disadvantages of injection molding vs blow molding
- What is automotive hot stamping and molding technology?
- What is the difference between a hot runner and a cold runner in the mold?
- Automotive stamping die in large, precision and other areas of progress is obvious, the rapid development of plastic and rubber molds
- The top ten problems that are likely to occur in the mold testing process