With more than 20 years expiries , more and more people like to make the products by plastic injection moldings, as there are ten advantages than other ways .
 
1) Cheaper than other ways , and it is long- term mold life . the mold cost could be a few thousand dollars. while once the mold is created you can create a very large volume of plastic components at a minimal cost.  For this reason, large production runs using plastic machining can cost up to 25 times more than plastic injection molding
 
2) It's accurate. 
Plastic injection molding is such a precise method that it can fabricate nearly any type of plastic part. There are certain design restrictions, but the molds that are made allow the finished product to be very precise. In fact, accuracy is typically within 0.005 inches.
 
3) It's efficient. 
it's efficient . How fast? While the speed depends on the complexity of the mold itself, generally only about 15 to 30 seconds pass between cycle times.
 
4) Flexibility.
Aside from being an accurate production process, plastic injection molding is also a flexible one. we mean that it's simple to change the type of material that is being produced as well as the color that the product is being produced in.
 
 
5) It's widely used.
Plastic injection molding is one of the most popular plastic producing processes. Just look around you – you see plenty of products that were likely made via the process.
 
 
6) Low labor costs.
Injection molding equipment typically runs with a self-gating, automatic tool to keep operations streamlined and production ongoing, requiring minimal supervision.
 
7) It's resourceful.
With so much attention being paid to sustainability these days, it's commonplace for product developers to choose processes that benefit the environment and minimize waste. Plastic injection molding isn't only an efficient, effective process, but it is also resourceful. That's because a) only as much plastic as is necessary is used to create the part and b) excess plastic can be ground up and recycled after use. 


8) Ideal for creating high-strength components.
One cool benefit of plastic injection molding is that fillers can be added to components during processing, reducing the density of the liquid plastic while adding enhanced strength to the finished part.  Plastic injection molding is an ideal process for industries or products where parts need to be strong
 
9) A smooth, good- looking finished appearance.
Plastic injection molding is a process, for the most part, where produced parts need little to no end finishing. That's because all parts that come out of the mold are about the closest thing to a finished appearance. Yes, the surface finish is really that good right out of the mold! Getting back to benefit No. 3 on this list, here’s another an example of how injection molding creates low labor costs.


10) Co-injection molding.
Injection molding machines are able to process two or more different plastics at the same time.