rapid prototype , rapid prototyping , prototype ,CNC machining , CNC machinings , CNC turning , CNC turnings serives ，SLA , SLS ,

rapid prototype , rapid prototyping , prototype ,CNC machining , CNC machinings , CNC turning , CNC turnings serives ，SLA , SLS ,

BMW

If you are like me, you can’t wait to get a closer look at Tesla’s next-generation Roadster, but as we learned last week, it appears not to be a priority for Tesla as they focus on the base Model 3 and Model Y.Nonetheless, the automaker still decided to showcase the prototype in an episode of Jay Leno’s Garage – giving us new pictures and videos of the upcoming electric supercar.rapid prototyping

Porsche (China) Motors Ltd. is a subsidiary of parent company Dr. Ing h.c. F. Porsche AG. Porsche China commenced operations in 2001 to support Porsche partners in China through dedicated personnel who oversee every aspect of sales marketing and after sales functions.

Porsche (China) Motors Ltd. is a subsidiary of parent company Dr. Ing h.c. F. Porsche AG. Porsche China commenced operations in 2001 to support Porsche partners in China through dedicated personnel who oversee every aspect of sales marketing and after sales functions.

Moulds are built through two main methods: standard machining and EDM. Standard machining, in its conventional form, has historically been the method of building injection moulds. With technological developments, CNC machining became the predominant means of making more complex moulds with more accurate mould details in less time than traditional methods.

The mold cavity of a casting does not reflect the exact dimensions of the finished part due to a number of reasons. These modifications to the mold cavity are known as allowances and account for patternmaker's shrinkage, draft, machining, and distortion. In non-expendable processes, these allowances are imparted directly into the permanent mold, but in expendable mold processes they are imparted into the patterns, which later form the mold cavity.[23] Note that for non-expendable molds an allowance is required for the dimensional change of the mold due to heating to operating temperatures.

With injection moulding, granular plastic is fed by a forced ram from a hopper into a heated barrel. As the granules are slowly moved forward by a screw-type plunger, the plastic is forced into a heated chamber, where it is melted. As the plunger advances, the melted plastic is forced through a nozzle that rests against the mould, allowing it to enter the mould cavity through a gate and runner system. The mould remains cold so the plastic solidifies almost as soon as the mould is filled

Automotive molding or car body molding are decorative and protective moldings on the car body . The term applies both to the detail and the material. Car moldings include side body molding, lower body molding, door moldings, window moldings, footrest mold

Rotational Molding (BrE moulding) involves a heated hollow mold which is filled with a charge or shot weight of material. It is then slowly rotated (usually around two perpendicular axes), causing the softened material to disperse and stick to the walls of the mold

A jig's primary purpose is to provide repeatability, accuracy, and interchangeability in the manufacturing of products.[1] A jig is often confused with a fixture; a fixture holds the work in a fixed location. A device that does both functions (holding the work and guiding a tool) is called a jig.